Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Service Light on a 2018 Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Service warning light

In this short video, we will describe the steps needed to reset the oil service light on a 2018 Jeep Wrangler completely DIY. The procedure resets and clears the warning light on the dashboard, but do not forget to perform the oil change service as soon as possible. First, turn on the ignition by double-clicking the ignition button. Next, use the left arrows on the steering wheel to scroll down to 'Vehicle Information' and then to the right until you reach OIL LIFE. Simply hold down the OK button on the Oil Life option for a few seconds, and the car will confirm the reset operation.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
Resetting Service Light on Jeep Wrangler
Resetting Service Light on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Today, you will see the essential instructions to reset the service light for routine maintenance on a Jeep Wrangler. First, get into the vehicle: in…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos