Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows the procedure to reset the maintenance light for the 2017 Jeep Grand Cherokee. Follow these steps: 1. Use the up and down arrows on the left of the steering wheel to navigate to "Vehicle Info"; 2. Use the left and right arrows to select "Oil Status"; 3. Restart the instrument cluster while pressing the brake pedal and pressing the accelerator three times, then wait for the oil status parameter to update; 4. Restart the instrument cluster again and start the engine to verify that the entire procedure was successful.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
Reset Tyre Pressure Warning Light on Jeep Grand Cherokee
Reset Tyre Pressure Warning Light on Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Want to reset the tyre pressure warning light on a Jeep Grand Cherokee? Follow these steps to perform the reset. Turn on the ignition (you will see t…
How to Reset the Service Light on a Jeep Grand Cherokee
How to Reset the Service Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the service light on a Jeep Grand Cherokee, turn on the ignition. Use the buttons located near the steering wheel (control levers) to enter …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos