Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Battery

In this tutorial, you will learn how to replace the battery in the Jeep Compass, a very simple task. First, to ensure safety, make sure the key is not in the ignition. Then, open the bonnet and unscrew the fastening belt bolt using a 14mm socket. Once done, use a 10mm spanner to loosen the negative terminal nut, disconnect it, and repeat the process for the positive terminal, where you will also need to unscrew the two indicated screws. At this point, you can remove the battery and install the replacement by following the reverse procedure.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Jeep Compass
How to Replace the Remote Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the remote battery on a Jeep Compass, activate the switch located on the back of the device so that the key and its cover can be extracted…
How to change the battery in a Jeep Compass remote
Jeep Compass (2006-2016 / MK 1, MK 49) How do you replace the battery in a Jeep Compass remote? It's a fairly simple operation. Start by removing the metal key from the cover and use it to…
How to Replace the Key Fob Battery on a Jeep Compass
How to Replace the Key Fob Battery on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, see how to disassemble and replace the battery of the key fob on a second-generation Jeep Compass. First, take your key fob a…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - If the message Start & Stop not available on the Jeep Compass appears, what to do? Read answer
    • Compass 2016-2025 - Why is Start & Stop no longer available in the Jeep Compass? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos