Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulbs in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: License plate light

In this tutorial, you will see how to replace the number plate light bulbs in the Jeep Renegade, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot lid and locate the lights in question. Next, use a flat-head screwdriver to pry along the perimeter of the first bulb holder, disconnect the connector, and, turning it slightly counterclockwise, extract the bulb. At this point, simply insert the replacement, reassemble everything by following the reverse procedure, and repeat the operation for the opposite light.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light Bulbs in the Jeep Renegade?
How to Replace the Number Plate Light Bulbs in the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) As you can see in this tutorial, replacing the number plate light bulbs in the Jeep Renegade is a very simple and quick operation. First, ensure that…
How to Replace the Number Plate Lights on the Jeep Renegade
How to Replace the Number Plate Lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of th…
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos