Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Deactivate the Passenger Airbag in the Jeep Commander - Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025

In this video tutorial, find the instructions to deactivate the passenger airbag in the Jeep Commander and Compass. First, get into the vehicle and turn on the ignition; then navigate to the settings menu of the onboard computer using the arrow controls on the steering wheel, scrolling through the options until you reach the passenger airbag setting, as illustrated in the video. Confirm the deactivation of the passenger airbag by pressing the "ok" button; this will turn off the passenger airbag warning light on the dashboard.

Updated on 2 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

In the Jeep Compass, how is the passenger airbag activated?
In the Jeep Compass, how is the passenger airbag activated?
Jeep Compass (2016-2025 / 552, MK 2) .. seat or to perform maintenance work. In the Jeep Compass, this is done as follows: with the instrument panel on, access the Settings using the buttons.. …
How to Disable the Passenger Airbag on the Jeep Compass 2
How to Disable the Passenger Airbag on the Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) .. to disable the front passenger airbag on the Jeep Compass second generation, from 2021. First, get inside the vehicle and start the engine; then scroll.. …
How to permanently deactivate the Start & Stop system on the Jeep Compass
How to permanently deactivate the Start & Stop system on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) .. deactivate the start & stop function on the Jeep Compass (the same method applies to Renegade and Commander). In fact, it can be deactivated from the.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - Why is the Stop and Start service not available on the Jeep Compass? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos