Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service on a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the oil service on a Jeep Cherokee, a very simple and quick operation to perform only after completing the required scheduled maintenance work. Start by entering the cabin, then turn on the dashboard and press the accelerator pedal fully three times in quick succession.

Once done, restart the dashboard and check that the operation was successful. If not, repeat the procedure, ensuring to complete it within about 5 seconds of turning on the ignition.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Resetting the Oil Change Warning Light on the Jeep Cherokee (2018)
Resetting the Oil Change Warning Light on the Jeep Cherokee (2018)
Jeep Cherokee (2013-2023 / KL, MK 5) Today, follow these instructions to reset the service warning light for the oil change on the 2018 Jeep Cherokee, fifth generation. First, get inside…
How to Reset the Service Light on a Jeep Cherokee
How to Reset the Service Light on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In today's video, we will see how to reset the expired service warning on a Jeep Cherokee. This operation is necessary after routine maintenance, suc…
How to Reset the Service Light on the Jeep Cherokee
How to Reset the Service Light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Today's steps will show you how to reset the engine oil light (service) on the Jeep Cherokee. First, get into the vehicle and start by turning on the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos