Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a wheel on your car.

Model: Jeep Wrangler JK, MK 3 - Years 2007-2018
Part: Tires

Let's start by opening the trunk and lifting the panel that covers the kit to replace the wheels. At this point we remove the wheel cover placed on the rear hood of the car and unscrew the pins to get it off, at this point we go to replace the wheel that needs to be replaced, and then put the one we replaced back in the place where it was placed the other wheel. We put it back on the support bracket, and we put the pins back on to fix it, then we put the cover on and at this point we can put the kit back in the special compartment of the trunk. Here's how to replace a wheel on your JEEP WRANGLER.

Posted on 19 December 2018 by ScegliAuto

Video tutorial

Related tutorials

How to fit the spare wheel on the Jeep Wrangler
How to fit the spare wheel on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) The operations necessary to correctly mount the spare wheel in an emergency are really simple and take a few minutes to complete. First open the rear…
How do you replace the rear brake pads on the Jeep Wrangler?
How do you replace the rear brake pads on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In order to replace the rear brake pads of the Jeep Wrangler it is necessary to lift the car so that the corresponding rear wheel is not in contact w…
How to remove the spare wheel from the Jeep Wrangler
How to remove the spare wheel from the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you need to use the spare wheel on the vehicle or just want to remove it, just follow the steps below. Before starting, make sure you have turned …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos