Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch cable of the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Clutch

Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Kia Picanto in simple steps. First, we get inside the driver's side of the cabin and start removing the plastic cover found under the steering wheel; then we disconnect the clutch cable from the pedal, and subsequently disconnect the cable from the transmission (accessing it from the engine compartment), as shown in the video. At this point, we replace the cable along with its sheath, installing the new original one; all that’s left is to properly adjust the cable.

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Clutch Cable on a Kia Picanto
How to Remove and Replace the Clutch Cable on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today, we will go through the main instructions on how to remove the clutch cable from a Kia Picanto. First, open the bonnet of the vehicle and locat…
How to Adjust the Clutch Cable on a Kia Picanto
How to Adjust the Clutch Cable on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Today’s main instructions will show you how to adjust the clutch cable on a Kia Picanto. First, open the bonnet of the vehicle and locate the clutch …
How to Adjust the Clutch on a Kia Picanto
How to Adjust the Clutch on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Briefly follow these instructions to adjust the clutch on the Kia Picanto. First, open the bonnet and locate the clutch cable, which is found at the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos