Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Discs and Pads on Kia Ceed

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake system

See other generations:
Video tutorial

Here’s how to replace the front discs and pads on the Kia Ceed: first, check the brake fluid level, then with the front of the car lifted, remove the wheels. Unscrew the brake caliper, lift it, and remove the worn pads.

If present, disconnect the wear indicator. Unscrew and completely remove the caliper and its bracket.

Hang the caliper with a hook to avoid stressing the brake line. Remove the fixing screws and slide off the disc.

Do not use a hammer to avoid damaging the hub and ABS sensors. Clean the hub thoroughly (it must be perfectly smooth to avoid vibrations) and check the caliper, piston, and sliding guides.

Push back the piston to make room for the new pads. Clean the anti-corrosion layer off the new discs, fit them, and check their flatness with a dial gauge.

Reattach the caliper bracket, apply ceramic paste to the contact surfaces of the pads, and insert them into the bracket. Refit the caliper, put the wheels back on, lower the car, and tighten the bolts to the correct torque.

Before moving, press the brake pedal several times until normal pressure is felt.


Posted on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Kia Ceed
How to Replace the Key Battery in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) Start by pressing and holding the button located on the top side of the electric key for our Kia Ceed, which will open the physical key. Next, using …
How to Replace the Number Plate Light on a 2015 Kia Ceed
How to Replace the Number Plate Light on a 2015 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) In this guide for all owners of a second series Kia Ceed (2015), discover step by step how to correctly and safely replace the number plate light. Fi…
How to reset the service light on the 2017 Kia Ceed
How to reset the service light on the 2017 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To correctly complete the manual reset of the service light on your second generation Kia Ceed (year 2017), you must carefully read the following pro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos