Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Pads

Model: Kia Sportage MK 2, KM - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

Unscrew the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel.

Using a screwdriver and hammer, push out the two clips of the brake shoe spring. Check the brake fluid level and ensure it is not at maximum.

Using a plastic tool, remove the brake pads by extracting them from their housing. Install the new pads, paying attention to the rotation direction stamped on the body.

Remove the second pad and install the new one. Refit the spring and the two clips. Refit the wheel.

Recheck the brake fluid level. Reset the position of the pistons by pressing the brake pedal.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing Brake Pads on Kia Sportage
Replacing Brake Pads on Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Loosen the front wheel bolts, lift the front of the car with a jack, and remove the aforementioned bolts along with the wheels. Unscrew the two 14 mm…
Replacement of Front Brake Pads
Replacement of Front Brake Pads
Kia Sportage (1993-2002 / MK 1, JA) Lift the vehicle at the front with a jack and remove the wheel (it is advisable to use an axle stand for safety). There is no need to retract the pad…
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Kia Sportage (2004-2010 / MK 2, KM) Once the vehicle is lifted on the ramp, remove the front wheel and then the brake caliper from its support; remove the worn pads and detach the calip…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos