Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : Replacing the spark plugs on the engine

Kia Sportage - Video tutorial

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Spark plugs
Operation: Replacing the spark plugs on the engine

Disconnect the negative pole of the battery. Find a series of candles identical to the originals. In order not to confuse the cables, disconnect one spark plug at a time. Before proceeding with disassembly, carefully clean the pits with compressed air to eliminate any dirt that could fall into the combustion chamber. Using the special spark plug wrench, which has a rubber hooking device, gently insert it on the spark plug head and unscrew it. Be careful not to let foreign bodies fall into the pit. Replace the spark plug with one of the same model by carefully inserting it into the well, again using the special wrench and turning it gently, checking that it is screwed on correctly. In case of effort, remove it and try again. The spark plugs must be screwed with a torque wrench, if you do not have the wrench screwed in without over tightening. Proceed with the same operation with the other candles.


Posted on 15 July 2023 by ScegliAuto



Replacing the engine spark plugs
Kia Sportage (2004-2010 / MK 2, KM) Disconnect the negative pole of the battery. Find a series of candles identical to the originals. In order not to confuse the cables, disconnect one
How to change engine oil and oil filter on Kia Sportage 2.0 CRDI
Kia Sportage (2010-2016 / SL, MK 3) Let's find out together how to carry out the procedure and the ordinary maintenance coupon, replacing the engine oil and the oil filter, of the Kia S
How to replace the air filter of the Kia Sportage 2018
Kia Sportage (2016-2022 / QL, MK 4) To independently replace the engine air filter in your 2018 Kia Sportage, you just need to follow a few simple steps that we will discover together i

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos