Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Headlight bulb

Today's instructions will show you how to dismantle and replace the headlight bulb on a Kia Picanto in simple steps. First, open the bonnet of the vehicle and start removing the front headlight; to do this, unscrew the fixing screws and disconnect the lamp's electrical connector, as shown in the video. At this point, remove the plastic cover and unclip the metal spring to remove and replace the dipped beam bulb with a new one of the correct type and with the same fitting; insert it into the headlamp unit and reassemble everything!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on a Kia Picanto?
How to replace the headlight bulb on a Kia Picanto?
Kia Picanto (2004-2011 / 2A, MK 1) To replace the headlight bulb on a Kia Picanto, open the bonnet to access the engine bay and remove the circular plastic cover located at the back of…
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the left front headlight bulb of the Kia Picanto is a very simple and quick operation to be carried out independently. We start the procedu…
How to replace the front headlight bulb of the Kia Picanto
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replace the bulb of the right front headlight of the Kia Picanto. Model produced from 2011 to 2017, it is a really simple and quick operation to be c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos