Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Spoiler on a Lada X-ray

Model: Lada Xray MK 1 - Years 2015-2022

If you want to install a spoiler on your Lada X-ray, obtain it in advance from e-commerce platforms with longer delivery times. Place the spoiler on top of the rear window and temporarily secure it with tape, marking the outline of the spoiler with paper markers. Thoroughly degrease the areas where the spoiler will be permanently mounted, then apply a thin layer of primer. Make cross-cuts on the part of the spoiler that will contact the body with a utility knife. Apply silicone adhesive, ensuring it follows the outline of the profile and some in the center. Now remove the tape covering the edges of the part that contacts the body, which we have reinforced with silicone. Remove the markers from the body and position the spoiler. This is the most delicate moment; it’s better to have someone assist you. Use the same method for the hatch spoiler if you plan to install that as well. The procedure is identical.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Lada X-Ray?
How to Replace the Front Headlight Bulbs on a Lada X-Ray?
Lada Xray (2015-2022 / MK 1) As shown in this tutorial, replacing the front headlight bulbs on a Lada X-Ray is a very simple and quick operation. First, ensure the key is not in …
How to Replace the Remote Battery on the Lada X-Ray?
How to Replace the Remote Battery on the Lada X-Ray?
Lada Xray (2015-2022 / MK 1) In this tutorial, see how to replace the remote battery on the Lada X-Ray, a very simple operation. For this, you will need a replacement CR2032 batt…
How to Replace the Cabin Air Filter of the Lada Xray 1.6
How to Replace the Cabin Air Filter of the Lada Xray 1.6
Lada Xray (2015-2022 / MK 1) Today, we will see in this brief guide how to remove and replace the cabin air filter of the Lada Xray with a 1.6 engine. First, get inside the vehic…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos