Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Universal Roof Bars on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Roof rack bars

See other generations:
Video tutorial

This video shows how to fit universal roof bars on a second series Lancia Ypsilon. Universal roof bars can be used on cars with or without roof rails (fixed bar secured to the car roof).

Fit the roof bar kit as shown in the video, using bars calibrated to the width of the car (use a tape measure). Position the brackets at both ends of the doors on the car's original roof rails.

Once the width of the anchoring brackets is adjusted, tighten the pins with the butterfly bolt (if a lock is present) until they are fully secured to the roof rails. Finally, apply the safety caps on both sides.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Fit a Rear Bumper on a Lancia Ypsilon
How to Fit a Rear Bumper on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) How do you fit a rear bumper on a Lancia Ypsilon? Let's see how to proceed; it's not too complex if done methodically. First, grab the bumper and pos…
How to Replace the Key Battery of a Lancia Ypsilon
How to Replace the Key Battery of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Begin by prying off and removing the "Lancia" emblem from your Lancia Ypsilon using a thin but sturdy tool. Then, using a cross-head screwdriver, uns…
How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos