Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs of a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Interior dome light bulb

Learn how to replace the damaged bulbs in the interior light of a Lancia Ypsilon: use a screwdriver to pry between the light and the headlining panel (without breaking anything); unscrew the screws (as shown in the video) and pull the light out from the panel, disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push the plastic with your hands until the clips are fully locked into the side plastic) and screw in the screws. Test the correct operation of the light after installation.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulbs of the Lancia Ypsilon.
How to replace the rear light bulbs of the Lancia Ypsilon.
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In this guide, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Lancia Ypsilon. First, l…
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video tutorial, you will learn how to remove and replace the bulbs of the third brake light in a Lancia Ypsilon. First, remove the third brak…
How to Replace the Rear Bulb in a Lancia Ypsilon
How to Replace the Rear Bulb in a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) In today's video, see how to replace the rear bulbs in the first series Lancia Ypsilon. First, obtain the bulbs you need to replace. You can find the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos