Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Chrysler Voyager

Model: Lancia Voyager MK 1 - Years 2011-2014
Part: Engine oil

How to replace the oil filter on a Chrysler Voyager? Let's look at the replacement. Position your car on a column lift and raise it to a comfortable height for access. To change the oil, remove the plastic panel located under the engine, then, unscrew the bolt under the sump with a socket spanner. Once the bolt is removed, allow the fluid to drain into a container. Prepare to refit the bolt with the spanner. Replace the oil filter and top up the engine with the appropriate fluid. Finally, test the correct operation of the engine and its components.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Chrysler Voyager
Resetting the Tyre Pressure Warning Light on a Chrysler Voyager
Lancia Voyager (2011-2014 / MK 1) What to do if a warning light appears? Let's see how to reset the tyre pressure warning light on a Chrysler Voyager. To reset the tyre pressure warni…
Where are the fuses located in the Lancia Voyager?
Where are the fuses located in the Lancia Voyager?
Lancia Voyager (2011-2014 / MK 1) The fuses of the Lancia Voyager are contained inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be p…
What is the fuse diagram for the Lancia Voyager?
What is the fuse diagram for the Lancia Voyager?
Lancia Voyager (2011-2014 / MK 1) In this video we can see where the fuse box of the Lancia Voyager is located and what is the corresponding diagram, useful in case we need to check t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos