Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Disassembly Instructions

Model: Lancia Thesis MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Dashboard

Video tutorial

Start by unfastening the central trim of the dashboard; remove the rubber mat under the climate control switches, in front of the gear lever; extract the ashtray drawer by unscrewing the two side fixing screws; continue by unscrewing the fixing screws of the centre console (two on top and two underneath) and pull it forward to disconnect the connectors attached to it. Then unclip the side tabs of the radio and pull it forward to remove it from its housing and disconnect the connectors (ensure you have the radio activation code before disconnecting).


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Dismantling Car Radio and Satellite Navigator
Dismantling Car Radio and Satellite Navigator
Lancia Thesis (2002-2009 / MK 1) The first tip is to protect the gear lever knob and the side trims of the centre console with masking tape to prevent scratches during disassembly. F…
How to Remove the Front Headlight on the Lancia Thesis
How to Remove the Front Headlight on the Lancia Thesis
Lancia Thesis (2002-2009 / MK 1) In this short video, you will learn how to remove the front headlight from a Lancia Thesis, following the instructions below. First, open and lift th…
Removing the Door Panel on a Lancia Thesis
Removing the Door Panel on a Lancia Thesis
Lancia Thesis (2002-2009 / MK 1) In this video, we will see step-by-step instructions for removing the front door panel on a first series Lancia Thesis. First, open the front door an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos