Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Air filter

Regular maintenance of your Lancia Ypsilon is essential to maintain optimal reliability and performance. In this new guide, we will explain how to correctly replace the engine air filter. This is a simple operation that anyone can perform. Before starting, ensure the engine is off and, importantly, cold. Then, fully lift the bonnet, unscrew the screws holding the upper part of the engine cover, and remove the cover. Replace the old filter with the new one and refit the cover. Re-tighten the screws removed earlier, and you are done.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Lancia Ypsilon
How to Replace the Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How to replace the engine air filter on a Lancia Ypsilon? Follow these steps: open the car door, pull up the engine compartment release lever located…
How to Replace the Air Filter of the Lancia Ypsilon?
How to Replace the Air Filter of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To replace the air filter of the Lancia Ypsilon, open the bonnet to unscrew the first three screws securing the end housing of the air filter. Then, …
How to Replace the Cabin Filter in the Lancia Ypsilon
How to Replace the Cabin Filter in the Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In today's video, you will learn how to replace the cabin air filter in the third series Lancia Ypsilon, which is currently on sale. First, go to the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos