Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Air filter

How to replace the engine air filter on a Lancia Ypsilon? Follow these steps: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the bonnet, securing it. Open the soundproofing panel for the air (where the air filter is located), remove the panel with the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reattach the air box panel and tighten the screws. Close the bonnet after maintenance.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the Lancia Ypsilon?
How to Replace the Air Filter of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To replace the air filter of the Lancia Ypsilon, open the bonnet to unscrew the first three screws securing the end housing of the air filter. Then, …
How to Replace the Cabin Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) How to replace the cabin air filter on a Lancia Ypsilon? The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever…
Replacing the Cabin Filter on a Lancia Ypsilon
Replacing the Cabin Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video, you will learn how to replace the cabin filter on a Lancia Ypsilon. The filter is located directly behind the plastic panel on the lef…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos