Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light on a Lancia Ypsilon

Model: Lancia Ypsilon 846, Ypsilon 3, Y3, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

See other generations:
Video tutorial

The first step to replace the brake bulb on the Lancia Ypsilon is to open the tailgate and unscrew the screws holding the light cluster in place using a 10 mm spanner. The screws are located in the thickness where the tailgate strikes when closed.

At this point, insert your fingers into the space left by the bolts and pull towards you while lifting it simultaneously. Using a flathead screwdriver, disconnect the wiring of the light bulbs, freeing the light cluster from the vehicle.

Now you can remove the cover that protects the brake bulb and replace it. Remember never to touch the bulb with bare hands. Refit the bulb in its place.

Now you can reattach the light cluster, reconnecting the connector and then aligning the top part followed by the two side pins. Now you can screw the two screws back in. Job done.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to replace the rear light bulbs of the Lancia Ypsilon.
How to replace the rear light bulbs of the Lancia Ypsilon.
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) In this guide, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Lancia Ypsilon. First, l…
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video tutorial, you will learn how to remove and replace the bulbs of the third brake light in a Lancia Ypsilon. First, remove the third brak…
How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before you begin, open the rear boot lid of your Lancia Ypsilon. Start by prising out the two rubber plugs. This will give you access to the two clip…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos