Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Lancia Y10

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Warning light – error code

Every time you perform an oil change as per the manufacturer's schedule, it is necessary to reset the oil service light. To do this, you must: turn on the ignition without starting the engine, press the accelerator and hold it down fully, then with your left foot, press the brake pedal 7 times and then hold it down for 60 seconds at the end of its travel. Release both the brake pedal and the accelerator, then switch off the ignition. Wait another 60 seconds before turning the ignition back on, and at that point, the service light will have been reset.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Lancia Ypsilon
How to Reset the Service Light on a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) After performing scheduled maintenance or simply a service on your vehicle, it is necessary to reset the service warning light. On a Lancia Ypsilon, …
Reset Service Light with Delphi Diagnostics on Lancia Ypsilon
Reset Service Light with Delphi Diagnostics on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's video, you will learn how to reset the service light for the regular oil change maintenance on a 2003 Lancia Ypsilon second series. First,…
How to Reset the Service Light on the Lancia Ypsilon?
How to Reset the Service Light on the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To reset the Service light on the Lancia Ypsilon, connect a diagnostic tool to the vehicle's OBD port. In this model, the port is located beneath the…

Other guides you may be interested in

    Frequently Asked Questions

    • Ypsilon 2011-2023 - How to reset the service in the Lancia Ypsilon? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos