Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

How to replace the cabin air filter (also known as pollen filter) on the Fiat Lancia Ypsilon version 2. The filter is located behind the glove compartment, on the passenger side. Open the glove compartment and unscrew the two screws located at the top on the square protrusions of the compartment, which hold a smaller drawer specifically for the vehicle documents.

Carefully remove this drawer (be cautious as there is an electrical cable connected) and behind it, you will find the filter. Remove it, clean the compartment thoroughly with compressed air, and then insert the new filter, ensuring the correct orientation (the arrows must always point downwards).

Now, replace the internal drawer, tightening the two screws, and the job is complete.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) How to replace the cabin air filter on a Lancia Ypsilon? The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever…
How to Replace the Air Filter on a Lancia Ypsilon
How to Replace the Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) How to replace the engine air filter on a Lancia Ypsilon? Follow these steps: open the car door, pull up the engine compartment release lever located…
How to Replace the Air Filter of the Lancia Ypsilon?
How to Replace the Air Filter of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) To replace the air filter of the Lancia Ypsilon, open the bonnet to unscrew the first three screws securing the end housing of the air filter. Then, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos