Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to disassemble the rear headlight of the Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y3, 846, MK 3, Ypsilon 3 - Years 2011-2023
Part: Tail light
Operation: How to disassemble the rear headlight of the Lancia Ypsilon

In today's video, we will see how to disassemble the rear lights of the Lancia Ypsilon. First, we open the rear tailgate. We need a star screwdriver. We unscrew the fixing screws and then detach the light from its housing. We replace the bulbs that need to be replaced (brake lights or turn signals). Remember that the position lights are LED, so they can only be replaced by specialized personnel. Once the operation is done, we test the correct functioning. If everything is okay, we proceed with the reassembly. Similarly, we can work on the other light and then finish our job.


Posted on 30 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - How to remove the rear light of the Lancia Ypsilon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos