Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Land Rover Evoque L551

Model: Land Rover Evoque MK 2, L551 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Instrument cluster

See other generations:
Video tutorial

In this video, you will learn how to reset the maintenance light on the Land Rover Evoque L551: first, turn on the ignition. Then, open the hood of the vehicle.

Open the driver’s side door and press the brake and accelerator pedals simultaneously. While holding these pedals, wait for ten seconds, and during this time, the service reset message will appear.

At this point, release the pedals and turn off the vehicle's ignition. Check that the maintenance indicator is off; if not, repeat the procedure from the beginning.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) In this tutorial, you will see how to reset the service light on a Land Rover Evoque, a very simple and quick operation. Before proceeding, ensure yo…
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) To reset the Service light on a Land Rover Evoque, first turn on the instrument panel using the appropriate button. Next, pull the lever to open the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos