Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Put the Rear Brake in Service Mode on a Land Rover Range Rover Sport MK2

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Parking brake

See other generations:
Video tutorial

In this video, you will see how to put the rear brakes of a Range Rover Sport MK2 into service mode for any necessary adjustments. First, open the hood and keep the driver's door open.

The transmission must be in park mode. Then, press down on the parking brake button and turn on the ignition.

This will prompt the vehicle to perform a tire check and then enter service mode. Remember, this mode is only for work on the rear brakes.

To return to normal mode, pull up the parking brake button and turn the ignition off and on twice in sequence.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Range Rover Sport?
How to Replace the Key Battery on a Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) If the battery in the Smart Key of your Land Rover Range Rover Sport is dead, follow the attached video guide for step-by-step instructions on how to…
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
How to Replace the Rear Seat Belt on a Land Rover Range Rover Sport
How to Replace the Rear Seat Belt on a Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) Today's instructions will show you how to remove and replace the rear seat belt on a Land Rover Range Rover Sport. First, open the rear doors and sta…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos