Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Land Rover Discovery

Model: Land Rover Discovery Discovery 4, MK 4, LR4 - Years 2010-2016
Part: Service warning light

Let's see how to reset the service light on a Land Rover Discovery: sit in the driver's seat and make sure the handbrake is engaged. Do not press the brake pedal alone during the procedure. The wrench icon should be visible on the dashboard. Open the hood completely: press the "start" button twice to put the vehicle in "ignition on" mode. Now press both the brake pedal and the accelerator pedal simultaneously, and keep them pressed for about 15 seconds. When the wrench light disappears, we can release the pedals. Press the "start" button to turn off the ignition and close the hood. Restart the vehicle to verify that the light is no longer on.

Posted on 13 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
How to Reset the Service Light on a Land Rover Discovery?
How to Reset the Service Light on a Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) On the Land Rover Discovery, reset the Service light by pressing the accelerator and brake pedals simultaneously. Next, insert the ignition key into …
How to Reset the Service Light on a Land Rover Discovery?
How to Reset the Service Light on a Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) To reset the Service light on a Land Rover Discovery, press and hold the accelerator and brake pedals simultaneously. Next, insert the ignition key i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos