Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Differential on a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Differential

See other generations:
Video tutorial

How do you remove the differential on a Land Rover Freelander 2? Lift the vehicle using a column lift, and locate the differential (at the rear of the vehicle) as shown in the video. Using a socket spanner, undo the securing bolts near the housing (disconnect any cables and pipes if present) where the differential is situated.

Once the differential is removed, take it out of the vehicle (replace it with a new part). Finally, refit the differential under the car (connect the pipes and cables) and tighten the appropriate bolts.

Lower the vehicle to the ground and test it.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Change Differential Oil on Freelander
How to Change Differential Oil on Freelander
Land Rover Freelander (1997-2006 / Freelander 1) How do you change the used oil inside the differential of a Freelander? Lift the vehicle on a column lift or jack, remove the plastic cover panel loc…
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Where is the OBD port on the Land Rover Freelander?
Where is the OBD port on the Land Rover Freelander?
Land Rover Freelander (1997-2006 / Freelander 1) If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, read this guide and follow the few simple steps …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos