Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to remove Evoque door lock and rear handle

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Lock
Operation: How to remove Evoque door lock and rear handle

Let's see how the lock is removed from inside the door of a Range Rover Evoque. Using the screwdriver, unscrew the screw on the side of the door as shown in the video, remove the left handle cover, then slide the handle to the left of the door. We disassemble the door panel, unscrew the locking screws of the lock. We remove the door opening handle and the operating lock. We mount the new lock in the door, screw in the fastening screws and close the door with the cover panel. We fix the handle inside the door, we screw the tightening screw.


Posted on 9 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Evoque 2011-2018 - What problems does the Land Rover Evoque door lock have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos