Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Lights on Land Rover Discovery

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Instrument cluster

See other generations:
Video tutorial

First, remove the plastic cover behind the steering wheel: the upper part is just clipped in, while the lower part has three Phillips screws that need to be removed from underneath. At this point, you will see the two screws that secure the bottom of the instrument cluster frame: remove them.

Now that it is free, disconnect all the connectors and remove it. Then, unscrew the screws that secure the instrument cluster on the sides, pull it out, and disconnect the connectors from the cluster. Once free, access from the back and remove the small bulbs that you can finally replace.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
How to Reset Warning Lights in the Land Rover Discovery Sport
How to Reset Warning Lights in the Land Rover Discovery Sport
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) In today's video, learn how to reset the oil and AdBlue warning lights in the Land Rover Discovery Sport. First, perform the maintenance recommended …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos