Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : Complete disassembly of steering wheel and airbag

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 2, MK 2, L318 - Years 1998-2004
Part: Steering wheel
Operation: Complete disassembly of steering wheel and airbag

The removal of the airbag requires a lot of attention, before proceeding activate the switch located in the dashboard that allows the disarming of all the installed airbags, the position of this device is well marked and in case of uncertainty refer to the booklet of use of the car. Start by unscrewing the screws holding the airbag lock, accessible through the holes on the sides of the steering wheel column using the Allen key. Loosen the screws and carefully pull the airbag cover by releasing the plastic catches. Once the airbag has been removed, disconnect the two connectors on the rear of it by releasing the small plastic tabs with a tool. Be careful not to drop the airbag module, do not place it near intense heat sources, do not take it away, do not shake or hit it, it could explode. Carefully unscrew the screw on the column and remove the wiring. Now it is possible to remove the screw fixing the steering wheel to the column using a 13 / 16â € socket wrench with extension.


Posted on 18 July 2023 by ScegliAuto



Disassembly of the steering wheel on Discovery
Land Rover Discovery (2004-2010 / LR3, L319, MK 3, Discovery 3) Removing the steering wheel with airbag on a Discovery? We disassemble the airbag to access the steering wheel locking pin. We insert the screwdriver
Remove the steering wheel on Discovery
Land Rover Discovery (2004-2010 / LR3, L319, MK 3, Discovery 3) Disassembling the steering wheel on Discovery? Let's remove the steering wheel from above the barrel, let's see. We insert a screwdriver into the slo
Disassembly of the steering wheel to replace the horn
Land Rover Discovery (1998-2004 / Discovery 2, MK 2, L318) Before proceeding, activate the switch located on the dashboard that allows the disarming of all the installed airbags. The position of this device i

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos