Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Fuel Filter on a Land Rover Defender MK1-MK2

Model: Land Rover Defender MK 6 - Years 1990-2016
Part: Diesel fuel filter

Today, we'll go through the procedure to remove and replace the diesel fuel filter on the first and second generation Land Rover Defender. First, locate the diesel fuel filter and start by removing the plastic cover by unscrewing the side screw; then remove the bottom cap, allowing all the diesel to drain into a container. At this point, use the filter wrench to unscrew and remove the filter, as shown in the video. Finally, install and hand-tighten the new one and reattach the outer plastic cover!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Defender (1983-1990 / MK 5) Discover how to remove and replace the fuel filter on the first series Land Rover Defender by following these simple steps. First, open the hood of y…
Land Rover Defender (1990-2016 / MK 6) Before starting, open the hood of your Land Rover Defender. First, completely loosen the bolt on the valve that controls the flow of fuel into the fi…
Land Rover Defender (1990-2016 / MK 6) This guide shows how to replace the diesel fuel pump on a Land Rover Defender TD5. The fuel pump is located in the rear compartment of the vehicle, b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos