Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : Replacing the remote control battery on the Range Rover Evoque - Velar

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 2, L551 - Years 2018-2024
Part: Battery
Operation: Replacing the remote control battery on the Range Rover Evoque - Velar

In this video tutorial we will see the step by step instructions to remove and replace the key remote control battery on the Range Rover Evoque second series, but also on the Velar. First we take our remote control in hand and start by removing the physical key, moving it forward, as shown in the video. At this point we are going to remove the rear cover to access and extract the battery; we just have to remove it and replace it with the new one, of the right type (in this case a 3V CR 2032). Let's insert it correctly on the battery compartment and reassemble everything!


Posted on 11 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2011-2018 - Where is the auxiliary battery located in the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is the auxiliary battery of the Land Rover Evoque located? Read Answer
    • Evoque 2011-2018 - Where is the battery located on Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What is the cost of the Evoque auxiliary battery? Read Answer
    • Evoque 2011-2018 - Where is the Range Rover Evoque battery located? Read Answer
    • Evoque 2018-2025 - Where is the battery located in my Land Rover Evoque? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos