Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Land Rover Discovery 2 TD5 injector disassembly

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 3, L319, MK 3, LR3 - Years 2004-2010
Part: Injectors
Operation: Land Rover Discovery 2 TD5 injector disassembly

In this video tutorial we will see how to remove the injectors of a Land Rover Discovery TD5, second series. First we open the bonnet of our car and we go to remove the plastic protection of the engine, we go to unscrew the fixing screws that we find at the bottom; then we are going to unscrew all the upper screws of the cylinder head cover, removing it together with the gasket. At this point we disconnect all the electrical connectors and with an extractor remove the five injectors, as shown in the video. Replace the gaskets of the same and reassemble everything!


Posted on 23 March 2024 by ScegliAuto



Land Rover Discovery Td5 diesel pump disassembly
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video tutorial we will see how to disassemble the fuel pump of a Land Rover Discovery Td5. Then we proceed to remove the upper pipes that car
How to remove the steering wheel and airbag on the Land Rover Discovery 2 TD5
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In this video tutorial we will see how to remove the steering wheel and the airbag on the Land Rover TD5; in this way we can also remove the horn but
Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos