Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

In this short video, we will see how to remove and replace the cap of the external rearview mirror and the turn signal bulb on the first generation Land Rover Evoque. First, remove the mirror cap; to do this, use a very thin pry tool to gently detach and remove it, as shown in the video.

Next, it shows how to remove and replace the turn signal bulb of the original mirror with a dynamic type; then proceed to replace the entire light assembly. Apply the reverse procedure for reassembly!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ig…
How to Replace the Remote Battery in a Land Rover Evoque 2
How to Replace the Remote Battery in a Land Rover Evoque 2
Land Rover Evoque (2018-2026 / MK 2, L551) To replace the battery inside your second-generation Land Rover Evoque remote, follow the steps described below. First, purchase a CR2032 battery, th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos