Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Antifreeze coolant

See other generations:
Video tutorial

In this tutorial, you will see how to replace the coolant in a Land Rover Evoque, a very simple and quick operation. First, wait for the engine to cool completely, then remove the upper cap. Move underneath the vehicle and remove the protection panel.

Next, loosen the drain plug bolt, allow all the fluid in the radiator to drain out, and reinstall the bolt. At this point, you can add the necessary amount of coolant to reach the ideal level indicated on the side of the reservoir.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
How to Replace the Rear Headlight Bulbs on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to remove and replace the rear headlight bulbs on the Land Rover Range Rover Evoque. First, open the trunk and star…
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ig…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos