Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2012 Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Follow this procedure to reset the maintenance light on a 2012 Land Rover Evoque: 1) Pull the lever inside the cabin to release the hood latch; 2) Open the driver’s door and keep it open for the entire procedure; 3) Insert the key and turn on the vehicle; 4) Press and hold the clutch and brake pedals simultaneously for at least 60 seconds; 5) After at least one minute, release both pedals; 6) Turn off the vehicle.

To verify that the procedure was successful, simply turn the vehicle back on and ensure that the service warning does not appear.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) Follow the procedure shown in the video to reset the service light on a Land Rover Evoque. Start by turning on the instrument cluster, then open the …
How to Reset the Service Light on a Land Rover Evoque?
How to Reset the Service Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) On the Land Rover Evoque, you can reset the Service light by turning on the ignition, inserting the key, and pressing the button to activate the dash…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos