Do it yourself
| ||||
|
Land Rover Evoque - Video tutorial
Model: Land Rover Evoque
MK 2, L551
- Years 2018-2024 In this video, the procedure for resetting the service light on the Range Rover Evoque is shown. The procedure is very simple and quick, and to carry it out, you must first turn on the ignition without starting the engine. Then, you must open the driver's door and open the hood. At this point, you must close the door and then reopen it. Now, you must press the brake pedal for 3 seconds. After 3 seconds, you must also press the accelerator pedal for 10 seconds, and at this point, the message "service reset" will appear on the instrument panel. Wait for the reset to complete before releasing the pedals.
Posted on 12 April 2023 by ScegliAuto
How to reset the service light on a 2020 Range Rover Evoque.
Land Rover Evoque (2018-2024 / MK 2, L551) The procedure to correctly reset the service light on your second-generation Range Rover Evoque (2020 model) is very simple and you just need to foll
How do you reset the Land Rover Evoque Service light?
Land Rover Evoque (2011-2018 / MK 1, L538) The Land Rover Evoque Service warning light can be reset by going inside the passenger compartment and turning on the instrument panel, after inserti
To reset the service light in the Range Rover Evoque.
Land Rover Evoque (2011-2018 / MK 1, L538) To reset the service light on a Range Rover Evoque, you can follow these steps: Make sure the vehicle is turned on and all doors are closed. Using th Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |