Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : Land Rover Discovery glow plugs check

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years 1998-2004
Part: Glow plugs
Operation: Land Rover Discovery glow plugs check

The glow plugs are nothing more than electrical resistances which, when the panel is switched on, overheat in order to preheat the combustion chamber and create the best thermodynamic conditions for cold starting a diesel engine in which the explosion occurs by self-combustion of the mixture. diesel air generated by the compression of the mixture by the pistons; as there is therefore no external ignition, it is very important to preheat the combustion chamber, it is therefore understood that in the event of a cold start failure, one of the possible causes could be the malfunctioning of one or more glow plugs; a very quick method to check if the glow plugs are efficient is to check that they are not open; then connect the indicator light to the positive pole of the battery and with the tip touch the power pins of the glow plugs themselves inside the relative connector: if the light bulb turns on then the glow plugs are not interrupted.


Posted on 1 September 2023 by ScegliAuto

This video is currently unavailable


Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
How to reset the service in the Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this tutorial we can see how to reset the service in the Land Rover Discovery 4. Before proceeding with this simple operation, we must obviously h
Battery removal in the Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery of a Land Rover Discovery? We open the hood and see the disassembly of the battery. We lift up the front hood, releasing the loc

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos