Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Shift to Neutral in Case of a Breakdown on the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Briefly, we will cover the steps to shift the automatic transmission to neutral in case of emergencies or a breakdown of the Land Rover Evoque. First, get in the vehicle and turn on the ignition; then, press the brake pedal and the right shift selector on the steering wheel until the automatic shift knob on the center console rises, as shown in the video.

At this point, move the knob to the neutral position, allowing you to move the vehicle in case of an emergency; you can shift back into gear at any time.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Unlock the Gear Selector in the Land Rover Evoque?
How to Unlock the Gear Selector in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) In this tutorial, you will see how to unlock the gear selector in the Land Rover Evoque, a procedure to perform in case of emergency, for example, to…
How to Unlock the Gear Selector of the Land Rover Evoque
How to Unlock the Gear Selector of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this guide, you will find instructions to unlock the automatic gear selector in case of an emergency or if the Land Rover Evoque is disabled. Firs…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos