Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Land Rover Freelander?

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Land Rover Freelander, press and hold the button located just below the speedometer on the right side of the instrument panel. The ignition must be off while you hold the button.

Once held, insert the ignition key into the lock and turn it to switch on the instrument panel. This will allow you to continue holding the button until the light resets.

When this occurs, you can release the button and then turn off the instrument panel.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Land Rover Freelander 2?
How to Reset the Service Light on the Land Rover Freelander 2?
Land Rover Freelander (2006-2016 / Freelander 2) To reset the service light on the Land Rover Freelander 2, press and hold the button located on the right side of the instrument cluster, just below …
How to Remove the Auxiliary Belt on a Land Rover Freelander
How to Remove the Auxiliary Belt on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Where is the OBD port on the Land Rover Freelander?
Where is the OBD port on the Land Rover Freelander?
Land Rover Freelander (1997-2006 / Freelander 1) If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, read this guide and follow the few simple steps …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos