Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Land Rover Evoque?

Model: Land Rover Evoque MK 2, L551 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

If devices in your Land Rover Evoque suddenly stop working, first check the status of the related fuses, which are shown in this video. The first fuse box is located inside the cabin, specifically behind the glove compartment on the passenger side.

The second box is found in the engine compartment, beneath the plastic cover right behind the air filter, while the third and final box is positioned on the left wall of the trunk. If a fuse is blown, make sure to use a replacement with the same specifications.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes in the Land Rover Evoque?
Where Are the Fuse Boxes in the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) The Land Rover Evoque has three fuse boxes instead of the usual two commonly found in most vehicles. The first two are located in standard positions.…
What is the Fuse Diagram for the Land Rover Evoque?
What is the Fuse Diagram for the Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) In this video, you can see where the fuse boxes are located in the Land Rover Evoque and the corresponding diagrams to consult if you need to check t…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos