Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Velar
  6. : How do you open the hood of the Land Rover Velar?

Land Rover Velar - Video tutorial

Model: Land Rover Velar MK 1 - Years 2017-2024
Part: Checks and maintenance
Operation: How do you open the hood of the Land Rover Velar?

In order to open the hood of the Land Rover Velar, you need to locate the appropriate lever that allows you to unlock the hood latch: this lever is located at the bottom left of the dashboard, on the driver's side for left-hand drive cars and on the passenger side for right-hand drive cars. Once the lever is pulled, the latch will be unlocked and it will then be possible to insert a hand under the hood, between the letters E and R, to move the securing pin. At this point, the hood can be lifted to access the components located inside the engine compartment.


Posted on 9 May 2024 by ScegliAuto



How to change the battery on the Land Rover Range Rover Velar
Land Rover Velar (2017-2024 / MK 1) Let's find out in this video the steps that will allow us to remove and replace the battery on the Land Rover Range Rover Velar. First of all, let's
Guide to replacing the battery of the Land Rover Velar
Land Rover Velar (2017-2024 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the battery of the Land Rover Velar, following the instructions belo
How to reset the service on the Land Rover Range Rover Velar
Land Rover Velar (2017-2024 / MK 1) To reset the service on the Land Rover Range Rover Velar, we start by getting into the car and closing the driver's door; we pull the lever to open t

Other guides that may interest you

    Frequently Asked Questions

    • Velar 2017-2024 - What does the message "limited system function sos" indicate in the Range Rover Velar? Read Answer
    • Velar 2017-2024 - What to do if "SOS system limited functionality" appears in Range Rover Velar? Read Answer
    • Velar 2017-2024 - How much does a Land Rover Velar service cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos