Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Radio Fuse in a Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Dashboard

See other generations:
Video tutorial

Watch this video to learn how to remove the dashboard panel while extracting the original Land Rover radio. First, remove the front cover of the dashboard by hand, then unscrew the Torx screws with a suitable screwdriver.

Detach the rubber cover and also remove the dedicated screws. Using a plastic spatula, remove the stereo cover as shown in the video.

Disconnect the power connectors for the dashboard buttons. Unscrew the perimeter screws of the car stereo and pull it out of its housing.

Disconnect the power cables, antenna, and fuse holder from the stereo. For reassembly, proceed in reverse.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Land Rover Freelander?
How to Replace the Radio in the Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) To replace the radio in the Land Rover Freelander, use a tool to lever it out from its housing: once the radio is extracted, disconnect all the conne…
Fuse Diagram for the Freelander 2
Fuse Diagram for the Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video shows the location of the fuse boxes of the Land Rover Freelander 2, along with the diagram and the rating of each fuse. If you have lost …
Where to Find the Fuse Box on a Land Rover Freelander
Where to Find the Fuse Box on a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) The fuse box on the Land Rover Freelander is located on the passenger side, inside the glove compartment. Once you open the glove compartment door, a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos