Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Lexus?

Model: Lexus Lexus Various
Part: Warning light – error code

Video tutorial

In this tutorial, you will learn how to reset the tyre warning light on a Lexus. This operation is extremely simple and quick, to be carried out only after restoring the correct pressure in each tyre according to the instructions in the manual.

First, enter the cabin, then insert the key and turn on the ignition. Next, navigate to the general menu using the directional arrows on the steering wheel, enter "Vehicle Settings", then "TPWS", select "Set Pressure" and perform the reset by holding down the "OK" button.

Finally, complete the procedure by restarting the ignition.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure light in the Lexus LX?
How to reset the tire pressure light in the Lexus LX?
Lexus Lexus Various In this tutorial we can see how to reset the tire pressure light in the Lexus LX, an extremely simple and quick operation, to be performed only once …
How to Reset the Tyre Light on a Lexus LX 570?
How to Reset the Tyre Light on a Lexus LX 570?
Lexus Lexus Various In this tutorial, you will see how to reset the tyre light on a Lexus LX 570, a very simple and quick operation to perform only once the correct pres…
How the Lexus Tyre Pressure Monitoring System Works
How the Lexus Tyre Pressure Monitoring System Works
Lexus Lexus Various In this video, we will see how the Lexus tyre monitoring system works: the four sensors (one for each wheel) constantly send a radio signal with pres…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos