Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Programming the Door Lock

Model: Lexus IS MK 2 - Years 2005-2013
Part: Car door

This video shows how to automatically program the door lock. First, press the ignition button of your car a couple of times to turn on and illuminate the instrument panel. On the driver's door control panel, among the various buttons, find the button to lock the doors; press and hold the door lock button for about 5 seconds and wait for the doors to close. This way, you will have programmed the door locks even when the car is stationary; only the driver can open the doors from the inside and disable the lock.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Key for the Lexus IS
How to Program the Key for the Lexus IS
Lexus IS (2005-2013 / MK 2) Let’s briefly review the instructions that will allow you to program the remote key for the Lexus IS. To program the remote, you will need a diagnost…
Check Operation of Cabin Lights
Lexus IS (2005-2013 / MK 2) The cabin lights turn on when a door is opened and turn off when it is closed; if the lights do not turn on when the door is opened, perform the foll…
How to replace the front hole bulb of the Lexus IS.
How to replace the front hole bulb of the Lexus IS.
Lexus IS (2005-2013 / MK 2) To replace the front headlight bulbs of the Lexus IS, we need to pull the hood release lever and open the hood. For the high beam bulbs, we will use …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos