Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS indicator on the Lexus CT200H

Model: Lexus CT Zwa10 - Years 2011-2022
Part: Tire pressure warning light

If on the instrument panel of your Lexus CT200H (year 2011-2022) the TPMS warning light (relating to the tire pressure) turns on by mistake and you want to reset it manually, all you have to do is put into practice what is described in the following mini guide. First get to the driver's side and turn on the instrument panel without starting the engine as well. Then go to the pedal area and locate the "Set" button. Keep it pressed for a few seconds and release it as soon as the TPMS warning light on the panel goes off. Finally, also turn off the picture and you are done.

Posted on 1 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Lexus CT200H
How to Reset the Maintenance Light on the Lexus CT200H
Lexus CT (2011-2022 / Zwa10) In this video, you will see how to reset the service light on the Lexus CT200H: as with almost all cars, the first thing to do in these cases is to e…
How to perform a TPMS warning light reset on a Lexus.
How to perform a TPMS warning light reset on a Lexus.
Lexus CT (2011-2022 / Zwa10) To reset the TPMS warning light, related to tire pressure, on the Lexus CT, we need to: - turn on the vehicle's instrument panel without starting the…
How to recharge the starter battery on the Lexus CT200H
How to recharge the starter battery on the Lexus CT200H
Lexus CT (2011-2022 / Zwa10) In this video, we will see how to restart the battery of a Lexus CT200H with a flat battery. On these cars, the starter battery is located in the tru…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos