Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lexus
  4. :
  5. CT
  6. : How to perform a TPMS warning light reset on a Lexus.

Lexus CT - Video tutorial

Model: Lexus CT Zwa10 - Years 2011-2022
Part: Checks and maintenance
Operation: How to perform a TPMS warning light reset on a Lexus.

To reset the TPMS warning light, related to tire pressure, on the Lexus CT, we need to: - turn on the vehicle's instrument panel without starting the engine; - press and hold the TPMS reset button on the dashboard behind the steering wheel for about 10 seconds; - turn off the instrument panel when the light has turned off; We complete the reset operation by turning on the instrument panel to confirm the reset. If the light has not reset, it means that there is a malfunction in the sensor reading, and it will be necessary to go to the workshop.


Posted on 29 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos