Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on a Lincoln MKC

Model: Lincoln Mkc MK 1 - Years 2015-2019
Part: Door trim panel

In this brief and simple guide, learn how to remove and replace the door panel on a Lincoln MKC. First, open the front door and start by removing the window switch panel; pry it up from the sides and disconnect the electrical connector underneath, as shown in the video. Next, remove the various plugs on the panel, then unscrew all the fastening screws; pry the sides to remove the door panel, applying the reverse procedure for reassembly!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Lincoln MKC?
What is the fuse layout of the Lincoln MKC?
Lincoln Mkc (2015-2019 / MK 1) In case a device in our Lincoln MKC suddenly stops working, the first thing we can do is check the status of the respective fuses, whose diagrams are…
Where to Find the Fuse Boxes on the Lincoln MKC
Where to Find the Fuse Boxes on the Lincoln MKC
Lincoln Mkc (2015-2019 / MK 1) Let's see where the fuse boxes are located on the Lincoln MKC. There are three fuse boxes. The first is in the engine compartment, between the batter…
How to Change the Time on the Lincoln MKC
How to Change the Time on the Lincoln MKC
Lincoln Mkc (2015-2019 / MK 1) Follow this brief guide to change the time on your Lincoln MKC by following the instructions below. First, get in the vehicle and turn on the instrum…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos