Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Oil Filter in a Lincoln MKZ

Model: Lincoln Mkz MK 2 - Years 2013-2020
Part: Engine oil

To change the oil and oil filter in a Lincoln MKZ, start by going under the vehicle. Using a socket wrench, remove the bolts holding the skid plate and also take off the plastic clips to remove the skid plate. Once the plate is off, use a socket wrench to unscrew the oil drain plug, allowing the oil to drain into a container. After the oil has drained, use the appropriate wrench to remove the oil filter, placing a container underneath to catch any oil. After draining the oil from the filter seat, take the new oil filter, pour new oil into it, and lubricate the gasket with new oil before screwing it into place. After installing the new oil filter, reinstall the skid plate by tightening the bolts and inserting the plastic clips. Once the plate is back on, go to the top of the vehicle, open the oil filler cap, pour in the specified quarts of oil, and when you’re close to the recommended amount, check the level with the dipstick. If necessary, top off the oil; otherwise, close the oil filler cap, and the job is complete.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Lincoln Mkz (2013-2020 / MK 2) If the engine oil light on the instrument panel of your 2015 Lincoln MKZ continues to appear even after you have already changed the oil and filter, …
Lincoln Mkz (2013-2020 / MK 2) In this new guide for all Lincoln MKZ (MK2) owners, you will learn how to reset the engine oil light independently and without using diagnostic tools…
Lincoln Mkz (2013-2020 / MK 2) The procedure to manually reset the engine oil change light on a 2013 Lincoln MKZ is very simple and takes just a few seconds to complete without dif…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos