Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Bolero
  6. : How do I replace the Mahindra Bolero headlight bulb?

Mahindra Bolero - Video tutorial

Model: Mahindra Bolero MK 1 - Years 2000-2022
Part: Headlight bulb
Operation: How do I replace the Mahindra Bolero headlight bulb?

In order to replace the Mahindra Bolero headlight bulb, you have to go to the underside of the car, so that you can loosen the bolts that secure the internal protection panels. Once these bolts have been removed, it will be possible to detach the protective panel and access the rear of the headlight. In this way it will be possible to extract the bulb from inside its housing, so that the connector is then disconnected. After removing the old bulb, the new one must be connected to the connectors, inserting it into its housing in the headlight.


Posted on 25 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos